白云石制备似立方体状方解石型碳酸钙晶体及其机理研究

以轻烧白云石粉、氯化铵和二氧化碳为原料,在未使用晶型控制剂的情况下,通过蒸氨-沉钙过程制备出了似立方体状碳酸钙。研究了反应温度、溶液中钙离子浓度、通气速率、搅拌速度以及陈化时间对碳酸钙中方解石相含量以及晶体形貌的影响,并探索了沉钙反应的晶型控制机理。结果表明,在反应温度40 ℃、钙离子浓度0.05 mol/L、通碳速率100 mL/min、搅拌速度400 r/min和陈化时间2 h的条件下,制备出形貌规整、粒径分布均匀的似立方体状碳酸钙,平均粒径为5~10 μm。该研究为提升白云石的使用价值、生产高附加价值的碳酸钙产品,以及提高白云石资源的利用率提供理论基础。     

Biological activity of new amino phospha betaines with C10–C18 alkyl groups

New amino phospha betaines were obtained by quaternization of potassium salt of amino phosphonate and higher alkyl bromides. The structure of isopropyl (N-dodecyl-N,N- dimethylammoniomethyl)phosphonate was confirmed by single crystal X-ray diffraction. All synthesized compounds demonstrate high antibacterial and antifungal activities.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of poly(isopropenylphenoxy propylene carbonate) and its facile side‐chain functionalization into hydroxy‐polyurethanes

4‐Isopropenyl phenol ( 4‐IPP ) is a versatile dual functional intermediate that can be prepared readily from bisphenol‐A ( BPA ). Through etherification with epichlorohydrin to the phenolic group of 4‐IPP , it can be converted into 4‐isopropenyl phenyl glycidyl ether ( IPGE ). On further reaction with carbon dioxide in the presence of tetra‐n‐butyl ammonium bromide ( TBAB ) as the catalyst, IPGE was transformed into 4‐isopropenylphenoxy propylene carbonate ( IPPC ) in 90% yield. Cationic polymerization of IPPC with strong acid such as trifluoromethanesulfonic acid or boron trifluoride diethyl etherate as the catalyst at ?40 °C gave a linear poly(isopropenylphenoxy propylene carbonate), poly( IPPC ), with multicyclic carbonate groups substituted uniformly at the side‐chains of the polymer. The cyclic carbonate groups of poly( IPPC ) were further reacted with different aliphatic amines and diamines resulting in formation of polymers with hydroxy‐polyurethane on side‐chains. Syntheses, characterizations of poly( IPPC ) and its conversion into hydroxy‐polyurethane crosslinked polymers were presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 802–808     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

A new nonlinear optical silicate carbonate K2Ca[Si2O5](CO3) with a hybrid structure of kalsilite and soda-like layered fragments

Single crystals of a new silicate carbonate, K₂Ca[Si₂O₅](CO₃), have been synthesized in a multi-components hydrothermal solution with a pH value close to neutral and a high concentration of a carbonate mineralizer. The new compound has an axial structure (s.g. P6₃22) with unit cell parameters a = 5.04789 (15), c = 17.8668 (6) Å. Pseudosymmetry of the structure corresponds to s.g. P6₃/mmc which is broken only by one oxygen position. The structure consists of two layered fragments: one of the type of the mineral kalsilite (KAlSiO₄) and the other of the high-temperature soda-like α-Na₂CO₃, Ca substituting for Na. The electro-neutral layer K₂[Si₂O₅] (denoted K) as well as the layer Ca(CO₃) (denoted S) may separately correspond to individual structures. In K₂Ca[Si₂O₅](CO₃) the S-K layers are connected together via Ca-O interactions between Ca atoms from the carbonate layer and apical O atoms from the silicate one, and also via K-O interlayer interactions. A hypothetical acentric structure, sp.gr. P-62c, is predicted on the basis of the order-disorder theory. It presents another symmetrical option for the arrangement of K-layers relative to S-layers. The K,Ca-silicate-carbonate powder produces a moderate SHG signal that is two times larger that of the α-quartz powder standard and close to other silicates with acentric structures and low electronic polarizability.     

Highly diastereoselective multicomponent synthesis of polysubstituted 2-hydroxy-2-trifluoromethylpiperidineswith four and five stereogenic centers

The Michael–Mannich cascade cyclization of cyano olefins, ethyl 4,4,4-trifluoro-3-oxobutanoate, aromatic aldehydes and ammonium acetate provides convenient stereoselective formation of ethyl 5,5-dicyano-4,6-diaryl-2-hydroxy-2-(trifluoromethyl)piperidine-3-carboxylates with fourstereogenic centers and dialkyl 4,6-diaryl-5-cyano-2-hydroxy-2-(trifluoromethyl)piperidine-3,5-dicarboxylates with five stereogenic centers. Ammonium acetate plays dual role, acting as a base and as a nitrogen source.     

基于分子工程的方法设计首例具有Sr2Be2B2O7 (SBBO)结构的深紫外氟碳酸盐双折射晶体AMgLi2(CO3)2F (A=K,Rb)※

分子结构设计是开发新化合物和通过原子尺度操纵优化晶体结构的一种引人注目的策略. 在这个工作中, 利用分子工程的思想, 基于SBBO结构, 成功设计并合成两个新型氟碳酸盐KMgLi₂(CO₃)₂F和RbMgLi₂(CO₃)₂F. 在两个结构中, a-b平面是由CO₃和LiO₃F阴离子基团组成的无限[Li₃C₃O₆F₃]_∞层, 进一步相邻的层通过F原子连接形成一个独特的[Li₆C₆O₁₂F₃]_∞双层. 这种结构特征对改善晶体的层状生长习性和消除晶体的多晶性有很大的帮助. 光学测试表明, 该系列晶体具有大的双折射和短的紫外截止边, 是深紫外双折射晶体良好的候选材料.     

缝洞型碳酸盐岩油藏注水驱油提高采收率研究

Y油田为缝洞型碳酸盐岩油藏,油藏复杂的地质特征决定了其开发模式有别于常规砂岩油藏.为了有效提高Y油田采收率,利用Eclipse数值模拟软件建立了地质模型,对水平井长度、射孔间距及酸压缝长等油藏产能影响因素与转注时机、注采比以及关井时间等注采参数进行了优化.结果认为:对于Y缝洞型碳酸盐岩油藏,水平井水平段长度为500m、射孔间距为20m或酸压规模为100m时,累计产油量可达到最大值;压力降至废弃压力时进行转注,可获得最大采收率;周期注采比等于1时,周期时效与累计增油量达到最大值;关井时间为8天时,采收率提高幅度最大.